Rubber + Plastic Reshine

SHIPS NEXT DAY!

$30.00

60 ENTRIES 2X

Lifetime Warranty: Break it, we'll replace it.

Free Exchanges: Our exchanges are made easier than most retail experiences.

60-Day Money Back Guarantee: No questions asked.

Packaging updated in July 2026. Same formula, new look.

Rubber + Plastic Re-Shine is your shortcut to a fully restored interior and exterior. This long-lasting formula cleans, restores, and dresses vinyl, plastic, and rubber — inside and out. One application, zero sticky residue — safe on trim, tires, and faded plastics. Built for the driven, not the idle. For more tips and tricks, visit LGNDSupplyCo.com

Directions

Apply Rubber + Plastic Re-Shine to an applicator pad.
Spread evenly over the surface and work the product in.
Buff off any excess with a clean microfiber towel.
Safe for use on trim, tires, and faded plastics.

Note: No sticky or oily residue — long-lasting shine and protection. Shake well. Do not freeze.

Other Information Warning: May cause an allergic skin reaction. Read the Material Safety Data Sheet before use. Avoid breathing dust, fumes, gas, mist, vapors, or spray. Contaminated work clothing — along with protective gloves, eye protection, and face protection — must not be allowed out of the workplace. If on skin: Wash thoroughly with plenty of water. If skin irritation or a rash develops, get medical advice/attention. Take off contaminated clothing and wash it before reuse.

LGND Supply Co.'s liability is limited to replacement of the product with proof of purchase. No warranties. As is, with all faults. Manufactured in the USA. ® LGND Supply Co. 150 Universal Dr, North Haven, CT 06473. www.lgndsupplyco.com

Rubber and Plastic Re-Shine being sprayed in a fine mist

RUBBER + PLASTIC RE-SHINE / SURFACE RESTORATION

Bring faded surfaces back.

A long-lasting cleaner and dressing for vinyl, plastic, and rubber—inside and out—with a dry-touch finish and zero sticky residue.

Packaging updated July 2026. Same formula, new look.

01

CLEAN + RESTORE

Refreshes faded rubber, vinyl, and plastic surfaces.

02

DRY-TOUCH FINISH

Leaves no sticky or oily residue behind.

03

INSIDE + OUT

Safe on trim, tires, interior vinyl, and faded plastics.

DETAIL LINE FILM / THE COMPLETE ROUTINE

Built for every surface.

See the LGND Detail line in motion—from cleaning and correction to the final restored finish.

02 NEXT / RESULTS & ROUTINE

THE RESULT / RESTORED SURFACES

The finish comes back. The residue does not.

Rubber + Plastic Re-Shine cleans away dullness and lays down a long-lasting dressed finish across vinyl, plastic, and rubber. The surface looks refreshed—not greasy.

CLEAN + RESTORE DRY-TOUCH FINISH

Angled front view of the Rubber and Plastic Re-Shine bottle — DRY-TOUCH FINISH / NO STICKY OR OILY RESIDUE

HOW TO USE / THREE-STEP ROUTINE

Apply. Work it in. Buff clean.

Use an applicator pad for controlled coverage, then finish with a clean microfiber towel. The sequence is simple by design.

Angled view of the Rubber and Plastic Re-Shine bottle — PRODUCT PROFILE APPLICATOR PAD / CLEAN MICROFIBER

01
APPLY TO A PAD
Shake well, then apply Rubber + Plastic Re-Shine to a clean applicator pad.
02
SPREAD + WORK IT IN
Spread evenly over the surface and work the product in for consistent coverage.
03
BUFF OFF EXCESS
Use a clean microfiber towel to remove excess and reveal a clean, even finish.

USE NOTE: Shake well. Do not freeze. The formula is designed to leave a long-lasting finish without sticky or oily residue.

PRODUCT / 16 FL OZ MADE IN USA

Rubber and Plastic Re-Shine cleaner and dressing bottle

ONE BOTTLE / INTERIOR + EXTERIOR RESTORATION

MULTI-SURFACE / INSIDE + OUT

Four surfaces. One restored finish.

Built for the rubber, vinyl, and plastic surfaces that fade, dry out, and lose depth over time.

01INTERIOR VINYL
02EXTERIOR TRIM
03TIRES
04FADED PLASTICS

PRODUCT INFORMATION / CLEARLY STATED

Everything you need to know.

Directions, safety information, manufacturing details, and warranty language are organized below for quick reference.

PRODUCT USE

Apply Rubber + Plastic Re-Shine to an applicator pad. Spread evenly over the surface and work the product in, then buff off any excess with a clean microfiber towel. Safe for use on trim, tires, interior vinyl, and faded plastics.

For additional tips and tricks, visit LGNDSupplyCo.com.

SAFETY & HANDLING

Warning: May cause an allergic skin reaction. Read the Material Safety Data Sheet before use. Avoid breathing dust, fumes, gas, mist, vapors, or spray. Wear protective gloves, eye protection, and face protection. Contaminated work clothing must not be allowed out of the workplace.

If on skin, wash thoroughly with plenty of water. If skin irritation or a rash develops, get medical advice or attention. Take off contaminated clothing and wash it before reuse.

MANUFACTURING & WARRANTY

Manufactured in the USA. LGND Supply Co.'s liability is limited to replacement of the product with proof of purchase. No warranties. As is, with all faults.

® LGND Supply Co., 150 Universal Dr, North Haven, CT 06473.

RUBBER + PLASTIC RE-SHINE / BUILT FOR THE DRIVEN

Restore the finish. Skip the grease.

A clean, long-lasting reset for the surfaces that make the whole vehicle look finished.

Rubber + Plastic Reshine